Window replacent Keepers

A landlord from Attleboro, MA says:
On the original keeper the space between the mounting hole centers looks to be 2 1/8, or 2 5/16 inches.

The overall width is 1/4 inch

Profile picture of Tom
Tom from SWISCO responded:
Thanks for posting. There is a big difference between 2-1/8" and 2-5/16". Can you give me the exact distance between the installation holes? Make sure to measure from the center of each hole, not their edges.
A home owner from Attleboro says:
Sorry - that was bad information all around :\

Between the center holes is 2-3/16.

The over all length is 2-19/32 inches.

It is actually 9/32 thick.

1/2 inch high.

Thank you.
Profile picture of Paul
Paul from SWISCO responded:
Thank you for getting back to us! I would start by looking at our 90-311 keeper. The measurements don't appear to be exact but it's the closest possible match. We also have the 39-284, but this is not quite exact either. See what you think.
Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)