Viewing all customer Discussions for:

Door & Window

Hi, I am Danny. I am working on rehabilitating 17 existing "Aluminum, Termo-break, Double Hang, Tilting Windows, and I need help identifying some of the parts I need. I am including a PDF of the existing Pivot Lock Shoe that I need to replace for the 17 Windows, totaling 68 "Pivot Lock Shoes". ... (cont.)

Good morning, I am looking to the complet system for those part see-attached (Coil,plastic part,ect... Let me know if you are able to help me thank you

I am looking to replace two of these balances, I could not tell from your site photos which model top and bottom I need.. if you can identify them I will purchase them. The unit is 28 inches long by 1/2 wide. please see attached photos.

sir, i am ordering the 90-026 part from your company. this part needs to be riveted on, unless you know a different way. do you know what size rivet i will need? the local hardware stores dont seem to carry the size and i know nothing about sizing this for my needs. thank you for any assistan ... (cont.)

Hello, I am having a problem choosing a replacement locking devive. I moved into this house 12 years ago and this might just be the only window that hasn't been replaced so I don't know how old it is but I do see on the old locking hardware "NuPrime" So I figured I'd start with you. I will send a ... (cont.)

I dont see a 33e on here is there something that is compatible in the 770 series? here are my pics they are identical to the 770 series let me know thanks, Jim H.

The tip of my window balance is yellow and you don't show this color on your chart. Which color should I use?

Hi there! I have a wonderful mid-century home that appears to have Jalousie windows installed according to an expert in my area. A prior homeowner removed all hardware from the two windows, so I cannot open them. Looking to identify the replacement parts so I can open these babies up in the Sprin ... (cont.)

Hello, I have balancer that i need to identify so i can order the correct one. the only thing stamped on the balancer is 28C. hopefully the attached picture with help you identify the item i need. thanks for your help Ken

LOOKING FOR REPLACEMENT STORM DOOR CLIPS, CANNOT FIND ANY MODEL NUMBERS OR BRAND NAME ON THE DOOR. THE CLIPS ARE SELF-LOCKING ALUMINUM OFFSET. THEY MEASURE 5/8 WIDE, 3/4"LONG (WHERE THE THUMB SCREW GOES INTO), THEN 1/4" LONG 90' BEND, THEN 3/8" LONG RETURN BEND THAT GOES AGAINST THE GLASS DOOR P ... (cont.)

Hi, I need to identify and order the attached channel balances in these pictures, : the measurements are 9/16" x 30" for the channel, 9/16" width on the top end piece and 7/16" width and 1" front to back on the bottom piece; the number stamped on the channel seems to be: 29C USB or 290 USB. Hope th ... (cont.)

I need balances like the ones in the pictures I have provided. I need six 31" and six 29". The balance body is 5/8" wide and 1/2" deep. please let me know that you received this and whether or not you can supply the parts Thank you Mike

I am looking for a mechanism like the 40-034K for an outside screen door to a pool area. I would like the mechanism to lock from the outside without having to lock it with the key. A pool service person comes in through the door to an enclosed pool area which has a locking screen door. Sometimes ... (cont.)

House has 1960 Bilt_Well double hung windows. Need to replace the Caldwell window balances which are 8"by 33/4" by 1." Would any of your Anderson window balances work? Thanks!

I have two double hung windows that need replacement balances. I have no idea the manufacturer. My home was built about 10 yrs ago. The stamping on the channel balance says 3640. It is a 1/2 inch wide and 37" long. The plastic parts on the ends (bottom and top fittings) match the parts in your ... (cont.)

Can you tell me which tilt latch I need to purchase

I need 5 channel balances for one of my jobs. Its 1/2 inch and there is a number on the balance 3350. I am sending few picks of the balance itself. Please let me know how much will it cost and how long will it take to ship it to my location. Sincerely Steve

I am replacing both tilt-window channel balances on an Anderson double-hung. One balanced was marked "24HD" and he other "24XHD." What is the difference between these two? I would like to replace them both with your 25" Series 751 with 24HD equivalence. Is this a correct replacement? ... (cont.)

I need to replace a SIMONTON Reflections Pivot Bar, but I do not see one on your web site that resembles mine. The order# marking on the decal is 0682572003001. The windows were purchased in 2007 and the contractor doesn't have the part. Can you help me? Thank you

Good day! I have purchased the 15-158 shoes and S152-5 coils, how do you attach the coil to the shoe?? was I supposed to order something else? I see how they would go together? was there a screw or something I should have order?? I did see those pan heads. Thanks Jeff by the way got my order t ... (cont.)