Viewing all customer Discussions for:

Door & Window

I need a left hand side slide bolt for my triple track screen. Pictured is the one from the right hand side. Thank you so much

I have 2 crank covers that are cracked. I can open the window, but when I try to close it the worm gear comes out and the window stays open. I can close the window by hand. Will a new plastic cover fix this, or do I need a whole new crank assembly? It seems to me all I would need is a cover to k ... (cont.)

We have Keller windows in our Florida home. Several of the windows are missing a small black window guide/track that keep the window in position. How can I get those replacement parts?

I need several replacement coils for double hung windows. The panel dimensions are 33.25 X 35.5", double insulated. The actual weight of each panel is 30 pounds. I have 16 windows that need replacement. The old coils were 5 pounds each, with four on each window. Several of the windows currently ... (cont.)

Looking to replace 28" Channel Balance. It's stamped with 2730, BSI, and RR. Thanks

I want to replace the single rollers on the doors with dual rollers. I ordered the 81-095 and they are not the right wheels .I believe I need the 81-153. I need to return the 81-095 and reorder 14 of the correct dual roller. the wheel is 1.5" total length of housing is 1.2" width is 11/16 Mike ... (cont.)

I am in need of a replacement lock for my restroom window. Included in these photos are a pic of my window, and the actual lock from an exact window in my house.

I need to replace these and need your part number. They are stamped 28 3 CALDWELL BM I also need to replace the take out clips. Thank you

Hi, I need an andersen sash balance, my numbers are J18 5 23 7-77. I was assuming I needed the 523 balancer, however the picture of the new balancer does not show screw holes through the balancer like the picture of old balancer has, I need these screw holes. Does the balancer come with the 2 scr ... (cont.)

I want to order 30" sprial balancers (non-tilt) but dont see the color white how do I go about ordering this, I need (14).

Looks like I need some 28" Series 770 Balance assemblies but don't know which ones. Currently have in there now. Windows are Milestone series 1000. Sash is approx. 30" x 50" with insulated glass. I'm hoping you have cross reference charts so I don't have to go back to the house to weigh the sash. T ... (cont.)

I have been having trouble finding a wheel assembly from a custom patio screen door. I previously bought the "84-095 Moss Patio Door Roller" but it's too narrow (it shall be 1/2" or 9/16" wide) and doesn't fit well and operates the same. Please let me know if you can find the right part for me. ... (cont.)

hi my name is Eric, i have a question about 14" Series 800 Channel Balance, when i was trying to order the part, but it has a option of 13c 13b 13a, can you let me know whats the meaning of that? please define for me, thank you very much!

The existing balance is stamped UB 28C and is 1/2" channel that is 29" long It is not the original since the contractor installed " heavy duty" balances when the large window was very difficult to operate ( the overall upper an lower opening is 51" W x 72" H. Which of your kits would be best to ... (cont.)

TRYING TO FIND A REPLACEMENT FOR THIS BALANCE, WILL NEED A FEW SETS. 1/2" WIDE 29 INCHES LONG LABELED (28D U.S.B.) SEE ATTACHED PICTURES

I'm trying to find replacement of this balance. it's 1/2" (9/16") wide with 21" long, the attached picture shows the head at the top and the end at the bottom. The end has no wings with 1" width which must be 15-002. So the right model must be S351-21 and the following one is what I need, am I right ... (cont.)

1. Does the 82-009A come with an outside pull similiar to 82-042? It's hard to tell by the picture. I can't use anything other than 82-042 because it would be flush with the jam. 2. Is it possible to replace the gray pile 58-004 without sliding it out/in the end of the track. It looks like it w ... (cont.)

This roller has a 1-1/8" OD concave steel wheel. Width of housing 1s 1-9/32". Length of fixed housing is 1-5/8". Height of housing is 1-1/16"

I have ordered and received an inside door handle. it is item # 40-150. It appears to be the correct part, but the hole that goes over the center rod is too small. I'll bet it's adjustable, but I can't figure out how to do so. Can you help me?

I need to replace a few window balances but don't know which part to order. I removed the channel balance and it measures 29" end to end on the metal part. It measures 9/16? wide. It's has a label "UB 28D". I also weighed the windows and it is 23lbs each.