|
Jasmine from SWISCO responded:
September 12, 2023
Thanks for reaching out! Your coil balance housing looks similar to our 15-087 coil housing pivot. Carefully review and compare the dimensions to those shown below to determine if this is the correct replacement. I am confident these are the replacement you'll need. 
Detail of 15-087
The coil housing pivot is compatible with the Series 180 coil balance spring. Specifically, you'll need the S180-6 Coil Balance Spring. The metal mounting bracket that secures the coil in the window channel is part 16-024. Your pivot bar appears to be our 26-422. Again, take a look over the dimensions to confirm that this is the right replacement. 
Alternate image for 26-422
Alternate image of 26-422
|
|
|
Jasmine from SWISCO responded:
September 15, 2023
Thanks for confirming the measurements. It does not appear that we have an exact replacement for your pivot bar. Our best suggestion would be that you would need to use a different type of pivot bar and there is a chance that you will need to drill new installation holes. Theoretically, you could still use the 26-422, you would just need to drill new holes to install it. We have a few different "U" shaped pivot bars that could potentially work as a replacement for your existing pivot bar. Start with our 26-068 and 26-089, see if these might be worth considering as a replacement. These are compatible with the 15-087 coil pivot housing. 
Dimensions for 26-068
Alternate image for 26-089
|
