|
Casey from SWISCO responded:
December 21, 2023
hello, We'd be happy to look into this for you but we would need to see a photo of the front of your housing pivot that the pivot bar engages with. I don't recognize your pivot bar at first glance but I'm going to have one of our senior experts take a look and see if they could recommend a replacement for you. Seeing more detailed photos of the coil assembly may also help us narrow down which pivot bars would be compatible. Thank you! |
|
Paul from SWISCO responded:
December 21, 2023
As Casey mentioned, we can't be sure without seeing photos of your coil assembly from additional angles but I can tell you that the 26-405 pivot bar fits into the S210-10 Roller-Tilt shoe. No special tools are needed to install this balance system. With that being said, you'll need to carefully review the dimensions below to ensure that the backset of the pivot shoe installation holes, as well as the width and thickness of the coil balance housing, match your original hardware. Take a look and let us know if you have any other questions. 
Alternate image for 26-405
Alternate view of 26-405
Alternate view of 26-405
Alternate image for S210-10
|
|
|
Casey from SWISCO responded:
December 26, 2023
Your coil balance assembly indeed looks like the Series 210 that we recommended earlier. You should be good to go as long as the specifications match up. |
|
|
Casey from SWISCO responded:
December 27, 2023
It depends on the specifications of the original. The 26-405 is a place to start but you have to review the dimensions to see how they align with yours. |
