Quaker balances

A professional from Michigan says:
Trying to identify replacements for these side load, non-tilt balances. The uppers have a 2350 stamp. The lowers have a 2450 stamp
Thumbnail of the uploaded file named 20231221_124723.jpg
Thumbnail of the uploaded file named 20231221_124711.jpg
Thumbnail of the uploaded file named 20231219_134828.jpg
Thumbnail of the uploaded file named 20231221_124440.jpg
Thumbnail of the uploaded file named 20231219_134815.jpg
Profile picture of Bob
Bob from SWISCO responded:

Thanks for writing in. It appears you either have the S351-24 or S390-24, as well as either the S351-25 or S390-25. The only difference between the Series 351 or Series 390 Channel Balances is the depth of the bottom nylon shoe, or the measurement from 'heel-to-toe'. See the diagram below for reference. Compare both options with your old hardware to see what matches best.

Comparison of the S351 and S390 balance shoes.
Comparison of the S351 and S390 balance shoes.

For the S351-24 or S390-24, choose 2350 for a stamp option. For the S351-25 or S390-25, go with 2450. Let me know if you have further questions. 

A professional from Michigan says:
Hello. Thank you for your response. However I'm going to need a little bit more clarity, because as you can see, the exact width is in between the two measurements provided. 1 1/16".
Thumbnail of the uploaded file named 20231222_083514.jpg
Profile picture of Bob
Bob from SWISCO responded:

Hello. So long as the shoe is deeper than 1", I would go with the Series 390. Most likely it just wore down a bit due to age, hence why it's not quite measuring to 1-1/8". You could always check another balance just to be safe, but I think this is most likely the case. Let me know if you have further questions! 

How to Replace a Non-Tilt Channel Balance
How to Replace a Non-Tilt Channel Balance
VIDEO
WATCH >
How to Repair a Jammed Window
How to Repair a Jammed Window
VIDEO
WATCH >
How to Identify Replacement Channel Balances
How to Identify Replacement Channel Balances
VIDEO
WATCH >
How to replace a non-tilt channel balance
How to replace a non-tilt channel balance
GUIDE
READ >
Choosing a Non-tilt Channel Balance: What Will We Need?
Choosing a Non-tilt Channel Balance: What Will We Need?
GUIDE
READ >
Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)
Current wait time is 3-4 business days
We promise that one of our experts will personally get back to you as soon as they are able. Thank you very much for your patience and understanding. If your inquiry is time-sensitive, please feel free to reach us at (888) 991-1929 or at help@swisco.com.