Replacing pivots, balances, and (sweep?) locks for same "tilting" window - need help matching

Thanks for writing in! Your channel balances look a lot like Series 770 channel balances. You'll need the S770-21 with a 21C stamp. The shoe you have pictured here is no longer made however, our 15-167 should work well as a suitable replacement.

You will need to use a new pivot bar as your existing pivot bar would not be compatible with this shoe. Take a look at the 26-021. Carefully compare the dimensions for both the shoe and the pivot bar to confirm that these are the right fit. So long as one of the installation hole placements matches the one on the bottom of the sash, this pivot bar should work fine.

Alternate image for 15-167

Alternate image for 26-021

Your window tilt latches look a lot like our Combo Tilt Latch Sash Lock Device Pair, part 26-431P. To confirm that this is the right replacement, carefully look over the dimensions below.

Dimensions for 26-431p

We are happy to hear that we have been able to be a source of help for you! We look forward to hearing from you again for any future repairs you may have.

Have a great weekend!