Dave Sr. from SWISCO responded:
March 17, 2017
For your handle I would consider our 82-005. The mounting holes on the 82-005 are 4-15/16" apart, on center. See if your mounting holes are the same. If not, you will need to drill new holes.
As for that secondary lock at the bottom, I would suggest looking at our 82-040. Measure the pin in your lock to see if it protrudes 1/2" like the 82-040. If yours pin is longer, you might need to use the 82-053 or 82-052 keeper. I would keep your secondary lock the same. If it works well for you, there's no need to change it. |