Dave Sr. from SWISCO responded:
September 6, 2017
I would suggest using the 32-061 track kit. It is an inch shorter than yours. We do have the 32-062, but it is an inch longer (23-5/8"). With your drawer only measuring 19", the 32-061 is the better option. It will work--so long as you can lock it into the 32-018 rear drawer socket. To be safe, I recommend that you measure the depth of the cabinet on the inside. If it measures 24", then (from the 21-5/8" length of the 32-061, plus the 4" length of the 32-018, minus the depth of the cabinet) you should have approximately 1-1/2" to play with. See if you have room to use the 32-061. |
Dave Sr. from SWISCO responded:
September 14, 2017
I would suggest installing a block of wood at the back of the cabinet to make up the difference in the track length. You would install it under the socket, which would push it out the appropriate distance.
|
Dave Sr. from SWISCO responded:
October 5, 2017
Yes, I think that's your best bet. You want to make the shorter track longer, that's all you're doing.
|
Tom from SWISCO responded:
August 15, 2023
Hello! This is an old style drawer guide that we are unfortunately not able to supply. The best option we carry in our inventory would be the 32-025. While not identical to your original part, it still works in the same capacity. I think it's at least worth considering. Your next step should be to review our dimensions to verify that they all match up. Detail of 32-025
Profile view of 32-025
|