Viewing all customer Discussions for:

58-128 Gray Pile Weatherstripping, 9/32" x 5/32"

58-128 weather stripping - why are there twonumbers and what do they measure? I need some weather stripping.

Hi, I would like to replace pile weatherstripping in Champion windows that are 25 years old. Windows are in good shape but weatherstripping is shot. As you'll note in the photo sent, there is no way to insert the plastic strip into the slot because they are blocked by side frames that are not remov ... (cont.)

My current pile attached to aluminum strip is 5/16 x 5/32 inch. The width of aluminum strip is 5/16 inch. Window is 55year old Milco brand. Please tell me if you have a good replacement. Thanks

what size do I need? I'm looking for finned and no adhesive backing

Hello, Trying to help my grandparents replace the old weatherstripping in their sliding glass patios doors. Unfortunately there is no information on the manufacturer. Your help is greatly appreciated. Thank you!

The weather stripping slides into the slot on plastic piece. Picture shows side with weather stripping top of door is with out.cant find right size. Plastic piece of weather stripping that slides into holderis either 9/32 or 5/16 I think. Fuzzy part is like 2 pieces with plastic in between. Are the ... (cont.)

The weather stripping on my windows has disintegrated. The windows are single pane aluminum, the house was built in 1970. The backing measures 1/4 inch, I do not know the length of the pile. Can you make a suggestion? I have 28 windows

Hello, I've messaged you before regarding some of these parts, but I'm still looking and have some more info. The first pictures are a channel piece we had trouble identifying. I recently noticed that they have the number 0132 moulded inside. I found a local supplier but he was charging more than ... (cont.)

Hello, I'm looking to replace my weather seals. They look like they measure at 1/4 inch wide across the base. I was thinking 3/16 would work.

Looking for pile weatherstripping about 11/32 wide for the door slot and about 5/32 high at the sweep. Anything close? Thanks.

I'm looking for a side seal for a jalousie window that is mounted in the door of a 1965 Avion truck camper. I don't see a name on the hardware except for Phillips on the crank handle. I've attached a photo of a piece of the original seal and a drawing with the dimensions of the seal and slot. Thanks ... (cont.)

gray color 1/4×5/16 plz tell me if you have it or any other that can fit.

Do I order the pile height as measured? The striping has to be 20 plus years old. Looks like it's 9/32 x 5/32. I wasn't sure if the pile has worn down along with the fin seal ? Please inform Thanks Mike

Gray wool pile black in color not sure and not sure of the size or length.

This is the end view of my GRAY T spline rubber gasket that is on the edge of each door where they touch or connect together when the two sliding glass doors are closed. I don't see any similar product here. The bottom that goes into the T Channel is ¼" wide. The fin going up is about 5/32" high. Ca ... (cont.)

Hello, I am trying to find the correct replacement wool pile for our windows. I think the correct part number is 58-128. Could you look at the photos and advise if this is the correct part number? Thank you Mike

I'm looking to reseal most of the windows in my house using wool pile. I ordered a test roll to make sure that I had the right size. If I place an order for multiple increments of 25 ft, will they be separate, or will it be in a continuous roll? Alternatively, is it recommend to only use a single p ... (cont.)

I have 70s-era sliding windows (aluminum) that have worn piling. I'll attach photos. The base of the pile appears to be 1/4 inch. Can't tell the height because the pile is so worn down.

Weather stripping. Wool Pile. The closest measurement with digital verniers is .259 wide x .155 high. What is the probable measurement for purchasing to replace? Thank You