Viewing all customer Discussions for:

58-128 Gray Pile Weatherstripping, 9/32" x 5/32"

Hi, I took the measurements for my patio door, the wool pile is 9/16 x 5/32. I checked at your website, you only have the one with the fin seal. I would like to know if you carry the one without the fin? The wool pile on the bottom is 9/32 x .365 ( I measured with the Calliper). The base thic ... (cont.)

I will need 36 ft (so 2 rolls) of wool weatherstipping. I have enclosed a photo. The width is 9/32 and I was able to measure this accurately. The height is a little harder since it is worn down. The top of the sliding door (the photo) is a channel with 3/8 th depth between the bases of both ... (cont.)

Looking for weatherstrip for an old Acorn DorWal series 1200. it is identified on the parts list as #540-25013 fin seal weatherstrip. It is 1/4" wide at the base and the pile height is 3/16". I need 100' any color. Thank you for any help you can provide

Hello. I have measured my existing wool pile, 9/32w x 3/16h. I don't see this exact measurement, what would you recommend (need gray). This existing pile is about 35 years old. Attached are two photos. Thank you, Jessica

I have several vinyl clad sliders at my second home in Avon NC. One of them is missing the the "wood pile" weatherstipping at the bottom of the slider. It seals the bottom slider from weather when the door is closed. The channel it sits in measures 9/32 inches. Not sure about the depth maybe 3/32 i ... (cont.)

I can't find an exact match in your catalog for the weatherstripping below but this might be the result of the weatherstripping having been in place for over 30 years. Can you tell me which Swisco replacement weatherstripping you recommend? The width of the backing is approx. 9/32" (0.273 inches) ... (cont.)

I have a Acorn Dorwal sliding glass door. I have the weather stripping but can't figure out how to replace (remove) the weather stripping that is attached to the door and not the frame. Any quick suggestions?