Viewing all customer Discussions for:

S150-7 7 lb Series 150 Coil Balance

I have several windows that won't stay up when opened. I've viewed several YouTube videos but can't find anything similar to what I have or need to repair them. My windows have coiled steel ribbons that have broken and I have no cutout to remove the existing hardware/steel ribbons and pivot points. ... (cont.)

Hello,I cannot find a model number on my windows but these to me look like 150 series correct? I found the number #6 and #7 posted on the coil themselves. I just wanted to see if I am order the right parts below.#7 (S150-7) coilpivot shoe (15-140)cap (15-144)support barrel (15-145)#6 (S150-6)ThanksT ... (cont.)

Hi I live and work in the uk and I am looking for these s150 springs . I look after a contract that replaces these on a regular basis but now out of stock and can't find anyone to supply me. Firstly can you suggest a uk supplier or can you get me a quote together . I am looking for approx 20 x. 5, ... (cont.)

Broken springs 1/2 in wide with #7 stamped on spring. Window size is 46"wide x 32" tall, double pane glass One picture is the unbroken side and other photo is the broken parts removed from the bad side. Spring is 1/2 " wide with #7 spammed on it. What replacement parts do I need to order? Thanks ... (cont.)

I have two broken spring balances in a window. The coil has a #7 stamped on it and is 1/2 wide by approximately 45 inches long (tough to measure. I thing your #7 replacement will work but not sure if it is 1/2 wide. ThanksNorm

I have uploaded pics for your advise. please advise.

Large window has 2 coils. TC 340 on top and TC 74C on bottom. Small window has 1 coil TC 74C What # to order.

Hi, I am looking for the attached coil balance. I looked on your website and I don't see anything that resembles the end portion of this coil balance. Can you help me?On some sites it's called the coil balance and other sites it's called the constant force coil. There are no numbers or markings on t ... (cont.)

Looking for a few coil springs for an Alcoa tilt vinyl window. I had previously replaced a couple of the pivot locks, as shown in the picture and now new new coil springs. Let me know if the picture is enough.ThanksKeith K.

Hi there, I have a vinyl double hung window that does not stay open. Upon removing the sashe I found the springs on both sides broken. The springs are 1/2 inch 7 lb hook end that I could not find anywhere. I wonder if I can use your S152-7 instead. Also, the balance shoes are plastic closed rectangl ... (cont.)

Window sash is 32 x 16.5 and weighs 13.6 lbs. There is one spring on each side is the sash.

I need 3 sets if CV BAL and corresponding shoes, fir a 14 lb sash. pictures to follow. I also need 5 sets of insert tilt latches. I recently purchased some but they were too small. The ones I purchased were 26-266 and 26-267. These were smaller than I needed. The size I need is 2 7/7 long. The "T" i ... (cont.)