question regarding patio door handle set

A quick learner from USA says:
I spoke with one of your customer care representatives today and got help for the ordering of the following parts.
My question is: Will these be ok for a door width of 1 -11/16'' ?

We were able to successfully install the handle set and the mortise lock. However, we are facing alignment problem with the key lock. The center hole of the outside handle is not aligned with the center of the mortise lock, it is little higher, please see attached pic. So we are not able to insert the key lock. Is there another option for the outside handle? Or any other suggestion to make this work?

User submitted a photo of patio door hardware.
Profile picture of Dave Sr.
Dave Sr. from SWISCO responded:
Both the inside and outside handles can be set in different positions depending on the hole placement in the door. The inside handle has three settings for the turn lever, and the out side handle has various hole settings to align with the inside handle. Take a look and see if you can set it to your holes in the door.
Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)