sliding door rollers : SWISCO.com

Home Owner from Bear, DE

Nov 13, 2021 5:18 pm

I am looking to replace old sliding door rollers (two of them). They are metal (brass color) and have a '123' stamped on the housing. No idea what they are beyond that or what type of door it is.

Approximate measurements are 2.5 inch long, by 1 and 1/8 inch high and 1/2 or 5/8 inch wide The wheel itself appears to be 1 1/4 inch diameter and has about 1/4 inch groove

3 user uploaded images

4 Replies

Tom from SWISCO

Nov 16, 2021 1:15 pm

This roller looks like a good match for our 81-032B at first glance, but our dimensions differ slightly from yours. Look them over just to be sure.

Detail of 81-032B

Profile view of 81-032B

Home Owner from Bear, DE

Nov 16, 2021 1:37 pm

Thanks for the reply. It would seem as though the width is too much here. The one that we pulled out was less than 3/4 inch wide (it was just a hair over a half inch wide).

Is there anything narrower?

Dave Sr. from SWISCO

Nov 22, 2021 9:53 am

You need to measure the "bumps" on the sides of your roller. The body of the 81-032B is 9/16" wide, but the bumps extend that to 13/16", which is what you're trying to reach.