surface latches
Handy Person from Pgh, pa
Oct 6, 2017 7:38 pm
LH & RH surface latches,3 1/4 length,2 1/16 hole to hole,1 3/8 wide,5/16 thick,3/4 hole to sash edge, curved edges along lengths. Thank you
2 Replies
Tom from SWISCO
Oct 11, 2017 4:42 pm
As far as the shape, your latch looks like our 26-120 or 26-121. Those latches have the curved edges you mentioned. The shape is not important, though.
However, as for the size, the latch is actually closer to the 26-228 and 26-229, which don't have the rounded edges. I would go with the one that matches by size (which is the 26-228 or 26-229). Just compare the overall length of the two latches, and check if the screw-holes will line up.
However, as for the size, the latch is actually closer to the 26-228 and 26-229, which don't have the rounded edges. I would go with the one that matches by size (which is the 26-228 or 26-229). Just compare the overall length of the two latches, and check if the screw-holes will line up.
Related Products
Related Videos
Related Guides