Awning Crank Operator for Jalousie Windows

Question

See attached photo. The defective operators for which I would like to order replacements are installed on the left side of three-pane jalousie windows. The vertically spaced screw holes measure 5.25"CTC and the horizontally spaced ones measure 1.375". The link arm measures 2.25". The dimensions for 39-193 are very close. The only difference is a 1/8" discrepancy in the link arm. Do you think 39-193 (39-194) would work? Thanks. Howard

Casey · Accepted Answer

Hello,

We'd be happy to help but we can't confirm the best match for your operator without seeing photos of the assembly uninstalled so that the arms and installation holes are fully visible.

With that being said, I can tell you that the 1/8" difference in arm length wouldn't be a dealbreaker since there is some play in the gears. You would just need to be sure that the rest of the specifications below match up to yours. If you have any doubts, I would recommend getting back to us with detailed photos of your assembly.

Dimensions for 39-194