Dresser Drawer Hardware

Home Owner from Utah
We need two of the yellow parts that attach to the back of the drawer. The space or gap is 1 1/4 inches that goes on the rail or track. The drawers are are getting shredded from being odd track. Will fixing the yellow part solve this issue?

Another dresser needs the metal track or rail that goes under the drawer. As you can see in the picture it is 14 3/4 inches long and is 1 1/4 wide. The metal track is bent and broken. Not sure if the brown plastic part in the 2nd picture is broken. Thanks!
4 user uploaded images
2 Replies
Casey
Casey from SWISCO
SWISCO
Expert

Hello,

Your yellow drawer guide resembles the 32-088 shown below. Take a look at the dimensions, paying close attention to the height and width of the track opening, to confirm if it matches your original part. 

Detail of 32-088
Detail of 32-088

Profile view of 32-088
Profile view of 32-088

As for the metal track used in your separate drawer, the track is not available separately but we do offer the 32-053 kit. Take a look to see if you could follow the process below to replace all of the necessary hardware. Thank you! 

Reply to Thread
Current Photos:
Related Products
Related Videos
Related Guides