Sliding, bifold, closet door

Handy Person from NYC
This goes in the top of a folding, sliding, closet door. It sits in a hole in the door and is held in a track. The top of the screw broke so it no longer stays in the sliding door track. The top part of the screw, rotates/rolls, horizontally, going forward and back in the sliding door track. Let me know if you need more/better pictures. There two doors. They meet in the center and they slide outwards. They are only connected to the floor at the edges via a pin. The doors do not physically touch the ground.
5 user uploaded images
4 Replies
Lauren
Lauren from SWISCO
SWISCO
Expert

Hello, thank you for posting,

To further review, do you have an undamaged pin that could be measured? We will need to know the length of the pin along with the diameter of the cap. From there we can compare to our selection to determine if we can supply a suitable replacement option. Thank you! 

Handy Person from NYC
2 inches long. Half an inch wide at the top. Quarter inch at the bottom.
3 user uploaded images
Lauren
Lauren from SWISCO
SWISCO
Expert

Thank you for the additional information,

Unfortuantely we do not have an exact match. At first I thought the 21-130 pin and cap, but the cap seems too small. We found a spring loaded pin and housing you might be able to drill a larger hole in the wood door to accept the nylon body. The diameter of the cap is 7/16" in diameter. We cannot guarantee it will work, but review the specifications to see if you think it could be adapted to your door.

Let us know what you think and I apologize that we cannot supply a direct fit. 

Reply to Thread
Current Photos:
Related Products
Related Guides