Steel Cabinet Drawer Wheel

Question

Steel Cabinets from 1972. Drawer wheels are plastic, possibly nylon, outside diameter 15/16 inches, Wheel rolling flat surface is 1/4 inch wide and offset from steel surface by 1/8 inch, mounted into a pop in hole, and hole diameter is approx 5/16 inches diameter. The wheel rotates on a plastic center shaft. The wheel says
W-LM. CO

Casey · Accepted Answer

Hello,

Unfortunately, we do not carry a 15/16" diameter wheel. The closest options would be our 10-109, which measures 7/8". It is made for shower doors but these work perfectly well for drawers in our experience. Keep in mind that the 7/8" and 15/16" is not an insignificant difference and you would also have to find a way to install it with a screw.

The next best option would be the 32-039 that installs using a plastic rivet like your original wheel but has a diameter of 1". We can't make any guarantees but review the specifications of both options and see what you think. Thank you.

Profile view of 10-109

Side view of 10-109

The pin and axle dimensions of 32-039 drawer roller.

View of 32-039 disassembled

Profile view of 32-039

Side view of 32-039