1980's sliding glass door with impact glass

HELP! I am trying to replace the roller's in a sliding glass door in my home, the house was built in 1984 in south Florida and it is a 8ft wide, 74" tall door with a metal frame.

The pictures attached are the roller that I was able to pull from the bottom of the door. Here are the measurements of the wheel and housing:

The wheel diameter is: 1 1/2 wide
the case the wheel is in: is 1 5/8 high and 2 3/8 wide

Any assistance would be most appreciated! The door does not have any discernible markings stating who the manufacturer of the door is.

Thank you!
JM

Thank you Paul!
I pulled the door again to double check that I did not leave the outer housing in the door accidentally, and it appears that all of the rollers for both doors do not have an outer housing encapsulating them.

I am not sure whether or not this is normal, but everything I see online has the rollers in a housing, so this leads me to believe that either the rollers never had the external housing installed or the housing was removed at some point by the prior homeowner.

Any other ideas on this one? Would I be able to use a roller with a housing to repair my doors? Or am I able to purchase the roller you recommended and remove the housing? I appreciate your help!
Thank you,
JM