40 Green Point

A contractor from Larkspur, CA says:
Hello!

I need 2 spring balances for a 35"x23" aluminum single glazed sash, (sorry didn't weigh it)
The aluminum C-channel is 22" long (w/o ends). and is 9/16" x 5/8" in cross section
I could see an ID stamp: 21 A near one end

Thanks for your help.

-Kurt
Profile picture of Tom
Tom from SWISCO responded:

Hi there- thanks so much for posting! 

I was able to narrow what you have down to two options. You either have our Series 351 or our Series 390 channel balance. The difference between those balance lies in the depth of the bottom shoe. The Series 351 has our 15-002 shoe which measures 1" deep and our Series 390 has our 15-001 shoe and measure 1-1/8" deep. 

I believe your stamp will correlate with our 2110 option at checkout, but to be sure I would weigh your sash. 

Please carefully compare our measurements and information to what you have and get back to us if you have any questions. 

How to Replace a Non-Tilt Channel Balance
How to Replace a Non-Tilt Channel Balance
VIDEO
WATCH >
How to Repair a Jammed Window
How to Repair a Jammed Window
VIDEO
WATCH >
How to Identify Replacement Channel Balances
How to Identify Replacement Channel Balances
VIDEO
WATCH >
How to replace a non-tilt channel balance
How to replace a non-tilt channel balance
GUIDE
READ >
Choosing a Non-tilt Channel Balance: What Will We Need?
Choosing a Non-tilt Channel Balance: What Will We Need?
GUIDE
READ >
Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)
Current wait time is 3-4 business days
We promise that one of our experts will personally get back to you as soon as they are able. Thank you very much for your patience and understanding. If your inquiry is time-sensitive, please feel free to reach us at (888) 991-1929 or at help@swisco.com.