42-006 with 4-3/4" hole spacing

A home owner from Elizabethtown, Ky. says:
I have a Probilt French Double Patio door and the locking pin is broke in the bottom locking lever and I can't lock the door and can't find one. Would your model 42-006 replace the broke Probilt part? It looks the same, it is the same measurements EXCEPT the mounting screw holes. On what I have the measurement from CENTER HOLE TO CENTER HOLE is 4 an 3/4 in. BUT from inside edge of hole to inside edge is 4 an 1/2 in. as shown in your picture. SO what is it centerHole to centerhole or inside edge to inside edge. I'm use to reading Blueprints. Hope your's will work.
Thank you for the help.
Profile picture of Dave Sr.
Dave Sr. from SWISCO responded:
I took one of our 42-006 levers out of stock to measure it up. What I have is 4-1/2" hole centers, both on the outside and inside. I also took some other measurements. From the top edge down to the center of the top hole, I got 1-7/8". Up from the bottom rounded edge to the center of the bottom hole is 1-3/16". I hope these dimensions help. I cannot guarantee that the 42-006 will work, but you may be able to do it with some retrofitting.
Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)