81-112 Peachtree Roller removal

Question

I have identified the door via the top rollers that are unique to Peachtree Ciatation sliding door. Does the lower panel frame need to be removed on these doors to remove the roller assembly? Want to confirm before placing my order for 81-112

Jasmine · Accepted Answer

Hey there,

Thanks for reaching out to us! We're glad to hear that you were able to identify the hardware you need.

You will need to remove that lower panel/bottom rail to remove the roller from the door. Once you've removed the door you'll need to carefully lay the door flat, on some saw horses or on a table.

There should be a screw in each corner holding the frame together. After you've removed those screws, you should be able to remove the rail by tapping it with a wood block and hammer.

When removing the rail, we do advise being cautious since there is a potential to damaged the glass.

I hope this helps!