![webcam-10/21/2023, 5:09:04 PM](images/pictures/2023/10/713977.jpg)
![webcam-10/21/2023, 5:09:51 PM](images/pictures/2023/10/713975.jpg)
![webcam-10/21/2023, 5:10:42 PM](images/pictures/2023/10/713974.jpg)
Thanks for posting. I believe our closest match for this roller might be our 81-018, which is sometimes seen with Andersen doors, but the dimensions are quite a bit different from what you report. See the diagram below and double-check your measurements. Note that the width and height of the assembly, as well as the wheel diameter, are what matter most.
Another possibility is our 81-188, although this is a very large roller, which makes it unique, and I haven't seen it 'in the field' very often. Still, take a look at the dimensions below and let me know if this is any closer.
Let me know what you find out, and if neither of these seem right, let us know and we'll try and find something better.
Hope more phots help, perhaps my boyfriend measured wrong! Which is never an option, hahahah
Thanks for you help!
We will need 4
Of the ones that match.
The top has a wider gap then the first one you showed above. 81-8018.
Perhaps the second one will work.
I will take new measurements and send them along.
Thanks Bob.
Lynn
Sounds good, Lynn! We're here to help if you had any other questions. Otherwise, all orders can be placed on our site at your convenience.