Anderson/Pella Corner Help : SWISCO.com

Contractor from Denver

Aug 18, 2025 12:46 pm

What are additional dimensions of 95-169? Can a view of the other side of this item be made available?
I'm looking for a corner like but matching the same 1/2" section of 95-181. In a vain hunt for the perfect match, I've purchased similar corners to the 95-169 but this dimension was 3/8", and therefore too small, resulting in a loose fit/frame.
Likewise, the extrusion on the 95-181 is too narrow. I'm looking for a corner like 95-169.

5 Replies

Contractor from Denver

Aug 18, 2025 1:46 pm

Hi,
I'm looking for an 7/16" inside corner with an 3/16" extruded angle and 1/2" width that is most like the one at the bottom in this picture.
I know 95-169 is similar to the middle one at the corner, but the Swisco item description doesn't specify if the other side is 3/8" or 1/2" across.
95-181 is like the corner at the top of this picture, but the extrusion is too small (3/32").
Thanks!

1 user uploaded image

Dave Sr. from SWISCO

Aug 25, 2025 9:05 am

Hello,

The corner at the top of your photo resembles the 95-181 used for Pella screens. The middle corner looks like the 95-169 used for Andersen. Review the specifications below compared to yours.

Detail of 95-181

Alternate view of 95-169

Unforutnately, we have not been able to locate the corner at the bottom of your photo. We apologize for the inconvenience.

Contractor from Denver

Aug 25, 2025 9:30 am

Thanks. I'm looking for all the dimensions of 95-169, in particular, the backside of the channel (the reverse side). The picture is not detailed enough.

Dave Sr. from SWISCO

Aug 25, 2025 9:56 am

I'm not sure what you mean by the reverse side, but the leg dimensions measure 3/4" x 7/16" to fit Andersen aluminum screen frames made after October 4, 1991 as stated in our product description. Just let us know if you're looking for any other specific dimensions.