Back plastic mount for kitchen drawer slides

Start a new Discussion

Home Owner from North Falmouth, MA

Jul 15, 2020 9:04 pm

There are no numbers on the plastic sockets or on the slide. This is probably a 1980 product.

2 user uploaded images

6 Replies

Bob from SWISCO

Jul 17, 2020 2:13 pm

Start by viewing our 32-018. Look over the dimensions, particularly of the size of the gap that accepts the track, and let me know if you think this could work for you.

Home Owner from North Falmouth, MA

Jul 18, 2020 2:43 pm

Thank you for your response. Our track is 1" so the 32-089 product might be the right socket, right?

Bob from SWISCO

Jul 20, 2020 8:24 am

The 32-089 certainly could be correct based on that size, though note it also has a small groove in the right-hand socket to accommodate a flange found in certain right-hand drawer tracks. The 32-089 is also designed for tracks that do not slope in the rear (i.e. the tracks are level). The 32-018 as well as the very similar 32-119 have more of a slope.

That said I do want you to consider the 32-119 as well. Its dimensions are very similar to the 32-018 (1" x 3/8" vs 31/32" x 7/16", respectively), so if the specifications of the 32-089 I just explained don't seem right, I think the 32-119 might be what you need.

Home Owner from North Falmouth, MA

Jul 20, 2020 9:29 am

Thank you so much for your help! There is definitely a slope in the back and no fange on the right track, so I think I am going to order the 32-119 also the height dimension on your site, for where the track fits in, says 31/32".
Will it accommodate my 1" track?

Bob from SWISCO

Jul 20, 2020 11:27 am

Now that I think of it, the 32-012 might be a better bet, since its got a 1" gap exactly. This is very similar to the 32-119 otherwise. Let me know if you have any other questions.