Bi-fold doors

Home Owner from Jacksonville IL

Jul 24, 2023 9:27 am

I just bought a house and all the bi-fold closet doors have these clips holding the pins in place. I found part # 21-154 and they look like they would work. Do you think they will?

1 user uploaded image

9 Replies

Paul from SWISCO

Jul 25, 2023 1:36 pm

Thanks for reaching out to us. I can't confirm if the part you picked out will work for you. The 21-154 is the new design for the Slimfold rod clamp. Do your pins look similar to the 21-001 and the 21-007? Take a look at the specifications and see how they compare.

Home Owner from Jacksonville IL

Jul 25, 2023 1:48 pm

No they do not. They are just like a solid pin with a bushing on one end that does into the track. No clips attached to the pins. Each door has a threaded style system on the lower left corner ( if facing outside of the doors) to adjust height.

Home Owner from Jacksonville IL

Jul 25, 2023 1:52 pm

The clips I current have are inserted into door and then the smooth pin goes through the door holes and through the clip. Then you adjust the door height and alignment and then tighten the screws in the clips

Paul from SWISCO

Jul 26, 2023 12:41 pm

What you describe sounds like the old original Slimfold pins. Can you show us some photos of your pins?

Home Owner from Jacksonville IL

Jul 26, 2023 5:08 pm

3 user uploaded images

Paul from SWISCO

Jul 27, 2023 11:24 am

It looks like you have the old Slimfold bi-fold door pins that have been replaced with the 21-001 and 21-007. In replacing them, you would need one 21-001 bottom adjusting pin and three 21-007 spring-loaded pins.

Home Owner from Jacksonville IL

Jul 27, 2023 12:45 pm

Oh ok. Thank you for your replies. That's a lot of pins to buy. I have 8 sets of bi-fold doors

Paul from SWISCO

Jul 28, 2023 7:47 am

It's our pleasure to help. Good luck with the repair and let us know if you need anything else!