Broken metal clip

A quick learner from Covina CA says:
April 18, 2018
My metal hook/clip is broken. It?s the one that attaches to the cord. Can I get a replacement clip?
1420 bsi vv
Metal track is 14 7/8 long, 1/2 wide, 5/8 deap
Thumbnail of the uploaded file named 6ED89D74-9EE0-419E-BBD7-B3EBB31DF317.jpeg
Thumbnail of the uploaded file named image.jpg
Profile picture of Tom
Tom from SWISCO responded:
April 23, 2018

Sure, if all you needed is the hook then see our 62-106. Let me know if you need help with installation instructions.
A quick learner from Texas says:
October 28, 2018
any tips to help in replacing the broken metal clip would be appreciated. looks pretty straight forward, just releasing the spring and tying onto the new clip.

thank you,
Patrick
Profile picture of Tom
Tom from SWISCO responded:
November 6, 2018

Sure! We like to extend the cord and then carefully lock it into a vise. It's important to make sure its secure because these cords are under a lot of tension. If you pull them out and they get away from you, they'll snap back into the channel and could damage either the hardware or take an eye out. Make sure to wear gloves and goggles to be safe.

Once it's secured in the vise, you just untie it and tie the new one back on. Make sure you're holding onto the cord firmly when you release it, then gently let it retract into the balance.
Tension Cord Hook
Tension Cord Hook
62-106
$0.74
Classifying Channel Balance Fittings
Classifying Channel Balance Fittings
GUIDE
READ >
Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)
Current wait time is 3-4 business days
We promise that one of our experts will personally get back to you as soon as they are able. Thank you very much for your patience and understanding. If your inquiry is time-sensitive, please feel free to reach us at (888) 991-1929 or at help@swisco.com.