The part that goes into the wall is the same dimensions. It is missing the oval hole on the top, and has two pegs sticking out the back.
The piece that holds the drawer rail is 3" as opposed to 2.5".
C Shaped Drawer Socket with pegs sticking out the back.
Home Owner from Washington
Aug 1, 2017 2:13 am
It is very similar to Rear-Drawer-Socket-Pair/pd/Replacement-Drawer-Sockets/32-012
The part that goes into the wall is the same dimensions. It is missing the oval hole on the top, and has two pegs sticking out the back.
The piece that holds the drawer rail is 3" as opposed to 2.5".
The part that goes into the wall is the same dimensions. It is missing the oval hole on the top, and has two pegs sticking out the back.
The piece that holds the drawer rail is 3" as opposed to 2.5".
4 Replies
Paul from SWISCO
Aug 4, 2017 9:54 am
Thanks for posting. We may be able to help, but before we recommend anything we will need the size of opening that accepts the track (width" x height"). I would also like the distance between the pegs, though to be honest I'm not sure if we can get one with pegs. All of our sockets screw in. Would you be able to do that?
Home Owner from Washington
Aug 7, 2017 10:52 am
I was hoping for pegs, mostly just to be sure they're lined up correctly. But I was planning on screwing it in either way.
The opening that accepts the track is roughly
1" x .25"
The pegs on the back are about 1.25" apart
The opening that accepts the track is roughly
1" x .25"
The pegs on the back are about 1.25" apart
Paul from SWISCO
Aug 29, 2017 12:30 pm
Thank you for your continued patience. Unfortunately, we have not been able to find a closer match to your hardware. The 32-012 remains the best replacement we have.
Related Products