Cabinet drawer slides

Question

Hello,

I am looking to get replacement drawer slides for two different depth cabinets. In the attached photo the measurements of the stationary part of the slides are 20 1/4"(I do not have the drawer side of the slide for this one), and the other is 23 1/4" with the drawer part of the slide at 21 5/8". Ideally we would Ike to get parts similar enough to be able to just replace the drawer part of the slide but it is fine if it is not possible.

Thank you!
Cole

Casey · Accepted Answer

Hello,

the drawer slide shown in your photo resembles one of our self-closing options but, unforutnately, we do not carry the length that you're looking for. Our closest options would be the 32-061 (21-5/8") or 32-062 (23-5/8"). Take a look to see if one of these replacements could fit in your drawer opening.

Another difference is that your track has a 90-degree bend at the end, while ours is straight. For this reason, you would also need to install the 32-139 bracket pair on the back wall of the cabinet to accommodate our straight track. This does require a bit of retrofitting but, unfortunately, it would be necessary to install one of our replacement tracks. Take a look and see what you think.

Alternate image for 32-062

Profile of 32-062 drawer pair kit

Front view of 32-139

Side view of 32-139