Casement Operator for a Kolbe & Kolbe Window

Question

The measurement of the outer screws on the base plate - center to center is 4-3/8". The measurement of L30841 bracket from where it's attached to the operator to the joint of the other bracket is 4" - center to center. The measurement of the bracket with the plastic wheel on it that says Entry Guard Truth on it from where its attached to the operator to the center of the wheel is 9".

While working on this window I realized the lock is broken too. The measurement for the screws center to center is 2-3/8". Not sure if you carry the locks too.Please let me know if that's enough to go on, or if there's something else I can describe or measure for you.

Thanks,

Mark

Casey · Accepted Answer

Hello,

The operator shown in your photos resembles the Entrygard 39-031 at first glance, which uses the 39-107FK handle and cover kit. We also offer the 39-032 opposite-handed version. The determining factor would be how the length of the shorter link arm compares to yours. You'll also notice that the link arm on our part has a downward offset, while yours appears to have an upward offset. Our operators can still work you'll need to manipulate the arm to attach it to the sash bracket. Take a look and see what you think.

Dimensions for 39-031

As for the casement locks, take a look at the 38-097 and 38-098. Your keepers should be updated as well with our 38-079. Thanks for posting!

Alternate image for 38-098

Side view of 38-098

Alternate image for 38-079