Complete Mortice Lockset

Handy Person from kcmo
Aug 16, 2021 11:17 am
Will the complete Mortice Lockset fit a Larson storm door?
6 Replies

Bob from SWISCO
Aug 19, 2021 2:58 pm


We have seen the 40-049 on Larson Storm Doors in the past for sure, but the only way to know if this is what you need is to compare the dimensions to the original handle set and confirm if it matches up. Let us know what you find.

Home Owner from Louisville KY
Aug 25, 2021 12:49 pm
What are the complete dimensions of the lock set?
Distance between the handle and lock?
Distance between the top of the plate and the the handle.
Spacing between the screw holes.
I need to see if this lock will be a true fit.
Please and Thank you!
Distance between the handle and lock?
Distance between the top of the plate and the the handle.
Spacing between the screw holes.
I need to see if this lock will be a true fit.
Please and Thank you!
1 user uploaded image

Bob from SWISCO
Aug 25, 2021 2:25 pm


Hello again. The dimensions of the 40-049 are listed in the pictures on its shop page. For convenience I have produced those images below. Take a look and see if these match up with your old hardware.

alternate view of 40-049

Dimensions for 40-049

Handy Person from kcmo
Aug 27, 2021 1:43 pm
Thanks for providing the demensions and feedback.
I was able to make the Swisco hardware work on the Larson door. Just had to come up with some additional connectors and machine screws for the "through the door" fasteners. The pre-cut hole in the Larson didn't leave any thing to screw the inside and outside plates to.
Really like your US made lockset and hardware. When I need hard ware I will check your site first.
Thanks again for your great support.
I was able to make the Swisco hardware work on the Larson door. Just had to come up with some additional connectors and machine screws for the "through the door" fasteners. The pre-cut hole in the Larson didn't leave any thing to screw the inside and outside plates to.
Really like your US made lockset and hardware. When I need hard ware I will check your site first.
Thanks again for your great support.

Bob from SWISCO
Aug 27, 2021 3:08 pm


I'm happy to hear that everything worked out! Please let us know if there is anything else that we can help with in the future.
Related Products
Related Videos