Dimensions of 39-107FK?

Thanks for posting. The 39-107FK is really only meant to work with one type of operator, which is why we don't list dimensions with it. If you could show us a picture of your operator, we will be able to tell you if this handle & cover can work for you. Many thanks.

Hm, I really can't discern the operator in this photo. The actual mechanism beneath the cover, as well as the link arm(s), make up the whole device. Now this might be an Entrygard type, like our 39-031 or 39-032. With the cover and handle removed, the 39-031 and 39-032 have a centered spline (where the crank handle attaches). Is this the same case as your operator? Your cover looks like it has an offset handle, but it could also just be longer than the base of the operator. If you do have a centered spline, and if it matches the configuration an operator like our 39-031 or 39-032, then I think the 39-107FK should work for you.

Looking at what I can see in your photos I believe you have an older Ashland brand operator. The 39-375 cover plate is used on Truth hardware which is similar. The width of the 39-375 is 5-11/16". I be yours could be either 4-7/32 or 5-19/32" wide. Not sure the it will fit your hardware. Check to see on the arm of the operator. Sometimes the manufacture stamps it name on it. See what brand it could be.