Door Handle and lock Mechanism and Rollers

Quick Learner from Austin, Texas

Jul 16, 2019 9:38 am

I have this handle and it is labeled with "Allen-Stevens Corp" with what I believe is a part # of 1965. The holes are 4" on center and the door is 1 1/8" thick.

I need a new handle, new locking mechanism and two bottom rollers.

What parts do you suggest?

Thanks

1 user uploaded image

6 Replies

Bob from SWISCO

Jul 23, 2019 10:45 am

Thanks for posting. Is the distance between the center of each mounting hole actually 3-15/16"? If so, see our 82-003. Look it over and let me know what you think.

As far as rollers go, this hardware is very brand-independent, and so I can't possibly say what you need without seeing the original hardware out of the door. The thickness and height of the roller, as well as the diameter of the wheel, will be needed. Many thanks.

Home Owner from Evanston

Jun 18, 2020 3:42 pm

I need to replace this same item and as the previous person said the distance from the middle hole to the middle of the hole is 4" (not 3-15/16"). Do you have a match?
Thank you very much,
Nicole

Tom from SWISCO

Jun 23, 2020 8:38 am

Hello, Nicole. We don't have a handle set with a 4" hole spacing. I don't think any company ever made that size. It is more likely that yours is 3-15/16", which is very common. Make sure to measure from the center of each screw hole, not their edges.

Home Owner from Evanston

Jun 23, 2020 10:37 am

I did, but I've come to see that 3-15/16" is extremely close. And yes, I haven't had any luck finding 4" elsewhere either. Thank you for the confirming information. I will purchase the 3-15/16" from your site. Thanks!

Tom from SWISCO

Jun 23, 2020 11:34 am

You got it! Please let me know if you had any follow-up questions.