Door sweep

Question

Hello, good morning.

Do you have something that matches the door sweep in the link below?

See also the pictures attached.
Two pictures are of the metal guide riveted to the bottom of the door. It has been removed and is pictured in-hand.
It measures about 1 1/2" wide and is for a 32" door.
The low-hanging edges for the rubber to slide hang about a heavy 1/16" from the bottom of the door for the rubber to slide on to.

The bottom rubber has a inside measurement of about 1 1/2", to slide onto the metal sleeve on the door.
It is also spaced (the inside lip) about 1/32" thick, just enough for the thin metal to slide into it.

If you have any access to this produce, or have any questions, please let me know

Thanks in advance for your help.

Bob · Accepted Answer

Thanks for writing in. We don't have an exact match for this sweep, but take a look at our 58-176. This is installed by wrapping around the bottom of the door and installing on either side using screws. Take a look and see what you think.