G* 6600 side mounted drawer slide socket replacement

I need to replace this side mounted drawer slide socket that recently broke. The socket has the markings as follows: "G* 6600".
As seen in one image I uploaded, the slider assembly is about 22-1.2 inches long. The other end of the slider in this picture is mounted flush to the back of the drawer face.
Note that the socked is angled slightly upward and extends about 2-1/4 inches. The socket mounting face dimensions are pictured with a scale. The track groove itself has dimensions of about 3/8" by 15/16".
Other customers have posted questions for this original part G* 6600, but the part that you have recommended often has a different length than mine. I appreciate the guidance you can give me for this particular drawer, slide and socket assembly.

Thanks Bob. The part looks right and dimensions look good in the diagram at the link you provided except for the groove height of 3-1/32". It should be 1-1/32", correct? There must be a typo in the diagram since the overall part is only 2-9/32"?

Once you confirm the groove height, I'll place my order.

Thank you! I'm going to recommend SWISCO to all my homeowner friends.