Handle with Lock Combination

Home Owner from PA - Pennsylvania

Apr 30, 2020 8:48 am

Can you add lock 82-310 to this handle (82-030)?

If so, will this combination work with my hole pattern (see photo)? My dimension for the two holes furthest apart is 3-15/16?.

If not, do you offer a handle and key lock combination for my pattern? (My latch is not on center of the handle. It is located at the third hole down.)

1 user uploaded image

6 Replies

Bob from SWISCO

May 4, 2020 10:37 am

Thanks for posting. Our 82-086 and 82-087 have offset key locks and thumb levers. See if this style could work for you.

Home Owner from PA - Pennsylvania

May 4, 2020 12:50 pm

Since you are suggesting a different part number, am I to assume you are saying 82-030 will not fit my hole pattern? Please confirm.
When you say "offset", are you referring to it being offset vertically or horizantally? I have seen some of your videos that have the latch below center (like mine) and I have seen other videos that show that latch offset vertically (not like my hole pattern that is in-line). Your video for 82-086 shows a hole pattern that is not in-line vertically. So if the lock is off center from left to right, I'm not sure how this will work for my hole pattern.

Bob from SWISCO

May 4, 2020 12:55 pm

Sorry, I should have clarified. No, I don't believe the 82-030 will work for this exact reason: to adapt a key lock to its outside pull would require it to be centered, which yours is not. The 82-086 and 82-087 have a thumb lever and key lock that is offset vertically, closer to the bottom mounting hole than the top. I believe this would still work for your door; I've never seen horizontal positioning of these holes ever be an issue with a 3-15/16" set up. Let me know what you think.

Bob from SWISCO

May 4, 2020 1:52 pm

Let me know if you have any other questions, and thanks again for reaching out; we appreciate it.

Home Owner from PA - Pennsylvania

May 4, 2020 2:29 pm

Okay and Thank you!