Hazel Potvin

A home owner from Houston, TX says:
Window latch for tilt window. No name window. 11196 R is the number on the latch part.

Dimensions : 2 3/8 inches long by 1 1/4 inch wide. Screw holes are 2 7/16 inches apart.

I need the right latch but will take both in bone or white.
Thumbnail of the uploaded file named D074804B-1402-4065-8ED4-934184269DDB.jpeg
Thumbnail of the uploaded file named 180E9177-847C-4F91-9148-8C7BB2672B22.jpeg
Profile picture of Bob
Bob from SWISCO responded:

See our 26-078 and 26-079, or our 26-176 and 26-177. Look over all the dimensions, particularly the hole spacing or the distance between the center of each mounting hole, and see if one of these pairs matches what you need. 

A home owner from Houston, TX says:
I would like to restate the measurements for the tilt window latch I need. The picture I sent does show that the latch is 3 and 3/8 inches long. It is 1 and 1/4 inch wide which is the width of the window.

The distance between the screws is 2 and 7/16 inches.

The latch is spring loaded.
Profile picture of Bob
Bob from SWISCO responded:

The overall length of the tilt latch is not as important as the hole spacing, as well as the offset of the first hole, or rather the distance between that hole's center and the front edge of the tilt latches body. The 26-176 and 26-177 have hole spacing of 2-7/16", and an offset of 5/8". Does that offset match your old tilt latches? Let me know.


Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)
Current wait time is 4-7 business days
We promise that one of our experts will personally get back to you as soon as they are able. Thank you very much for your patience and understanding. If your inquiry is time-sensitive, please feel free to reach us at 856-317-6263 or at help@swisco.com.