Help finding a spring roller catch

I need your help finding a spring roller catch similar to the pictures I've uploaded. There is a 1/4" drop from the under mount point to the top of the rollers. To give you an idea of the overall size, the mounting slots for the screws are 1 5/16" on center. The depth from the back edge of the catch to the front edge of the rollers would be around 1 1/8". That dimension is an estimate since there is no plastic or nylon remaining on the rollers. Unfortunately there are no identifying numbers or markings on the catch. If you have anything close to this please let me know. I need a quantity of 4. If you don't have anything like this please suggest who might.

Thank you,

Dave 

Hello Casey-

The catch would probably work if it had the 1/4" drop from the mount point as ours do. Do you have anything with the 1/4" drop? Thank you for doing the research.

Dave

Thank you for the follow-up Tom. I'm going to see if I can find 1/4 spacers that I can use at each screw. If I can, I'll order the 32-301's.

Thanks again,
Dave