I need the noted part in dimensions listed.

Question

I looked through your catalog, your stock roller is 1"() x 0.25" (7mm). I need any roller mechanism with a 22-23mm outer diameter and 8.5-10mm thickness/width. I attached a photo of what I have with the current dimensions noted in the photo itself.

My cabinet door will not stay in the track with the current rollers, so it's pretty useless.

I don't care what it is made for, so long as I can attach it with a screw. It can be U grooved (as for a door) or solid (as for a drawer). The diameter and width are the relevant factors. Internal diameter does not matter, hardware is easier to find.

Paul · Accepted Answer

Hello,

It sounds like you're looking for a wheel around 7/9" in diameter. If so, we do not carry a drawer roller in that size, but we do offer the 10-109 shower roller and 33-087 screw. There might be enough play given that the drawers won't rub against each other. You probably have to replace both sides, but I would replace the damaged one first, then try the drawer to see how it slides. Thanks for posting.

Profile view of 10-109

Side view of 10-109