Hi,
I'm trying to find the part that matches my existing top sash stops. I have added the measurements to one of the photos based off of what you guys show on your new parts. It was a little overwhelming trying to match mine so I thought i would reach out!
Thanks!
Kevin
ID Top Sash Guide help
Handy Person from Patterson, CA
Aug 2, 2025 8:31 pm
3 user uploaded images
6 Replies
Bob from SWISCO
Aug 3, 2025 12:44 am
Hey Kevin, thanks for reaching out. At first glance this reminds me of the 18-199 Jordan Top Sash Guide, but some of the dimensions you mention do differ (the width, namely). Double-check and let me know if anything seems off. If so, I'll see if we can find something closer.
Dimensions for 18-199
Dimensions for 18-199
Handy Person from Patterson, CA
Aug 3, 2025 11:35 am
Hi Bob,
Thanks for the quick response. The width is 5/8" and not 3/8", that was my fault (I did remeasure to make sure though). So everything lines up except for the measurement from right under the top to the center of the bottom hole (slot). Being that it's only a 1/16" difference do you think it's that critical especially since it's where the screw goes?
And you were correct, these are from Jordan windows (circa early '80s is when the house was built).
Thanks!
Kevin
Thanks for the quick response. The width is 5/8" and not 3/8", that was my fault (I did remeasure to make sure though). So everything lines up except for the measurement from right under the top to the center of the bottom hole (slot). Being that it's only a 1/16" difference do you think it's that critical especially since it's where the screw goes?
And you were correct, these are from Jordan windows (circa early '80s is when the house was built).
Thanks!
Kevin
Bob from SWISCO
Aug 3, 2025 12:36 pm
Hey Kevin. No, I don't think that hole spacing will be an issue, especially since the size of the holes for screws are large enough where there's some play for slight difference. And knowing this is a Jordan window further confirms the 18-199 is probably the best choice. Let us know if you have further questions!
Handy Person from Patterson, CA
Aug 3, 2025 4:09 pm
Perfect, then I will go ahead and order a couple of those. I just got a new set of balances from you guys and thought I was done until I tried to install them and found that one of these was broken off! You guys have been a great help. Thanks again!
-Kevin
-Kevin
Bob from SWISCO
Aug 4, 2025 1:59 am
Glad we could help, Kevin! Please let me know how you make out, or if you need anything else.
Related Products
Related Videos
