I am looking for these Internal window corners. They are c=from an aluminum window screen, in a vinyl window. I am guessing from the 80's.
The screen is 5/16" thick, the corners are 3/16" . one side is split so it will fit in the top and bottom rail.
I will be getting 50 corners if we can get ones that work
Thanks
Bill
Hello,
This is an old nylon double-leg corner that hasn't been made in a long time. The good news is that you can use our 95-002 corner key as a replacement. What you do is use the 95-002 to hold the frame together while you install it into the channel that is closest to the screen groove. You'll then need to use one leg of your existing nylon corner (or, alternatively, one leg of the 95-002) to hold inside the slide latches on the bottom channel of the screen frame. It's a little awkward, but it does work.
