Kitchen Drawer slide
In the last image # 2604, what part do i buy to replace the plastic extenstion at the end. I also need to buy the Drawer slide - how do i find out correct measurement of same - do i measue the part screwed to the drawer or what you see in Pic
Hello,
I'm not sure what the function of the clip shown in your first two photos is but the 32-134 false front clips come to mind. Review the specifications below and see what you think.
As for the drawer bracket, we may be able to help but we would need you to write out the exact height and width of the opening that accepts the track to compare to our inventory. Thank you!
I don't believe we can offer drawer slides in the same length shown in your photos. Our closest options would be the 21-5/8" long 32-061 or 23-5/8" long 32-062 self-closing slide pair.
If you require the rear brackets used to install the slides, the 32-139 mounting brackets are often used with our self closing drawer slides. Look over these replacement options and see what you think.
Both pieces of our self-closing drawer slides would be the same length. If the parts of your slides differ, your best bet would be to measure the depth of the drawer opening to determine which length option would be the best fit.
The 23-5/8" long 32-062 self-closing slide pair would be our best match based on your slide length but make sure to confirm there is space in the drawer opening to compensate for the extra 5/8".
No problem at all. I was referring to the depth of the space where the actual drawer installs to ensure that you can attach the slides to the back with our brackets and the front edge of the opening without any overlap.