Kitchen drawer rear bracket replacement

A home owner from Buffalo NY says:
This has snapped off both sides of the kitchen drawer.
Dimensions are:
Width: 1.25"
Depth: 2.5"
Height: 1"

Do know where I can get a replacement pair?? Photos attached for clarity.
User submitted a photo of a drawer bracket.
Profile picture of Paul
Paul from SWISCO responded:
Good afternoon, and thanks for posting! I don't think we have this exact bracket. Could you give us the dimensions of the track that it holds? That may help us find a replacement.

In the meantime, you may want to see our 32-012, 32-014, 32-018, 32-089, and our 32-119 to see if any of these may work for you. Let me know!
A home owner from Buffalo. NU says:
Paul thank you for your reply. I tried your suggestions but they don't have the required slit on the back Which attaches to the horizontal plate on the back wall. I have attached extra photographs I hope they are clear enough! The die mentions of the side bracket is 22 inches Long and 1 inch high. Thank you!
User submitted photos of drawer hardware.
Profile picture of Paul
Paul from SWISCO responded:
Thanks for getting back to us. I see what you mean now. I've never seen a setup like this. I think your old sockets might have been specifically made for this furniture company, which would make finding replacements difficult. I think our closest matches would be the 32-089 or even the 32-018. They may work if you can screw them directly to the back wall of the drawer.
A quick learner from Charlotte, NC says:
Flatten out the protruding end pieces then drill holes in back metal. I used 6/32 bolts to secure 32-089 to the back piece.
Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)