Latching Handle : SWISCO.com

Home Owner from USA

Mar 12, 2024 2:58 pm

I need a replacement handle like this. or something that will work. 1 3/4 " between holes. The spring seems to be sprung. Original on cole sewell door.

1 user uploaded image

6 Replies

Casey from SWISCO

Mar 13, 2024 12:38 pm

Hello,

Your storm door hardware resembles the 40-177. This assembly has the same 1-3/4" hole spacing but we'll include all of the dimensions from our product page below. Take a look and let us know if you need anything else. Thank you!

Alternate view of 40-177

Alternate image for 40-177

Spindle for 40-177

Interior view of 40-177

Home Owner from USA

Mar 13, 2024 7:21 pm

I need the latch. The one you suggested isnt a turning handle latch. Any other suggestion. I dobt need tgr outside handle

Casey from SWISCO

Mar 14, 2024 8:55 am

Sure, look over the 40-150 turn handle shown below to see if this could work for your repair.

Alternate measurements of 40-150

40-150 spindle size and screw measurements

Side view of 40-150 handle

Home Owner from USA

Mar 14, 2024 9:43 am

40-150 just looks like a handle. I need something with a side latch to catch the other piece. see my original picture. thanks

1 user uploaded image

Casey from SWISCO

Mar 14, 2024 10:07 am

If you're referring to the keeper, unfortunately, we do not carry one for the 40-150 handle but you may be able to adapt the original keeper to work with the new handle if it is still in good condition. Keep in mind that modifications such as adding shims so that the keeper engages with the latch may be necessary.