Lock for Read door

Home Owner from Hamden CT
My rear door is a slider to the deck and the latch for the lock is missing. No names on the Door. The latch is 4"x5/8". The door is 1 5/8" wide.

The latch from the slider only comes out of the door a small
distance. The latch must fit within the opening in the slider part of the door to be able to meet the hook from the locking mechanism
4 Replies
Paul
Paul from SWISCO
SWISCO
Expert
Thanks for posting! This lock could be a few different things, actually. It's hard to say without more specific dimensions. Take a look at our 82-218 and 82-226, though, and see if either of these could work for you.
Home Owner from Hamden CT
You showed me the Mortise Lock either 82-218 or 82-226. The lock still operates properly.

The part that is missing I know is called the Keeper and the one that is broken and missing was not very deep. I looked at 89-020 but it is too deep. can you suggest something.
Tom
Tom from SWISCO
SWISCO
Expert
Ah, I see what you mean. Sorry for the confusion.

Well, we have a few keepers that are more shallow than the 89-020, thought it would depend on what the exact dimensions of your own hardware is. Take a look at the screw holes that are left over from your old keeper. How well do they match our 89-020? Could you also use our 89-021D or 89-021? Take a look and let me know.
Reply to Thread
Current Photos:
Related Products
Related Videos
Related Guides