Looking for replacement storm door handle

A home owner from Reading, PA says:
Hello,

My home was built in 1960 and has the original storm doors and handles/latches. One of the handle's plastic tongue has broken off. Here are pictures of an intact handle.

Do you have any suitable replacements which match this handle?

Thanks,
-Pete
Thumbnail of the uploaded file named PXL_20201212_163155341.jpg
Thumbnail of the uploaded file named PXL_20201212_163147647.jpg
Thumbnail of the uploaded file named PXL_20201212_163143138.jpg
Thumbnail of the uploaded file named PXL_20201212_163140161.jpg
Profile picture of Casey
Casey from SWISCO responded:

Hi Pete,

Unfortunately, we don't carry an exact replacement for this latch but take a look at our 40-051 and 40-052 to see if the dimensions of one of these options could work for you. Thanks for posting! 

A quick learner from Reading, PA says:
Hello,

I did try handles which look identical to those you suggested, however the screw holes are not in the correct location. I'd need to drill new holes a bit closer to the edge of the door in order for the latch to catch. Also the plunger mechanism from the outside part of the handle is too large for those replacement handles, so I'd need to replace the outside handle.

Thanks
Profile picture of Dave Sr.
Dave Sr. from SWISCO responded:

I don't believe your inside handle is still available but take a look at the standard handle 40-034. We also have the pull-up type handles, such as the 40-152 and 40-215, which unlock by pulling the handle upward on the outside of the door. We also carry the lever type like the 40-130 and 40-131 that also have a deadbolt lock at the bottom of the handle. Take a look at all of these handles that have the 1-3/4" mounting holes that I believe should match your dimensions. Take a look and see what you think!

Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)
Current wait time is 4-7 business days
We promise that one of our experts will personally get back to you as soon as they are able. Thank you very much for your patience and understanding. If your inquiry is time-sensitive, please feel free to reach us at 856-317-6263 or at help@swisco.com.