Merillat Drawer Socket

Question

I had a pull out drawer socket break, this was at the rear of the cabinet.  It's a plug type and not screwed into the cabinet so there are two big holes there now. The cabinets are Merillat and I know they don't have these anymore, and was hoping you had a replacement part that would cover the existing holes from the plugs.  What we bought at the local hardware store didn't work, where the screws would go in the plug holes were in the way.  Thank you!

Jasmine · Accepted Answer

Thanks for writing in! Your drawer socket appears to be an old Merillat drawer socket. Unfortunately, these are no longer made but the good new is we have two possible solutions that should work well as a replacement.

Something to consider is that the old Merillat socket is has two posts that allow it to plug into the back wall of the cabinet. With that said, you will need to drill new installation holes to install the new sockets.

Carefully review and compare the dimensions from the 32-119 Grass Adapter Bracket Pair as well as the 32-012 Rear Drawer Track Socket to see if either of these could work as replacement for your brackets.

Detail of 32-012

Alternate view of 32-012

Side view of 32-012

Side view of 32-119

Detail of 32-119