Metal Pivot Doors

Hello!

You have the old Float-a-way bi-fold door. The replacement parts are dwindling, and many are not available. We suggest converting over to the Slimfold door pins. We pulled up the parts you will need at the bottom of this page. We suggest two 21-404 tracks, one for the top and one for the bottom. They come with the pivot brackets and rubber bumpers. You will need two 21-001 bottom adjusting pins and six 21-007 spring-loaded pins. On each panel, you will install the 21-002 adjusting pin. This will raise, lower, and square up the door. For the 21-007 spring-loaded guide pins, you will need one for the top pivot and two for the top and bottom guide pins. You might need to replace the nylon bushings 21-152 & 21-153 if the old bushings are worn.