Mirror Closet Door Hardware Replacement?

Question

The pictures are of the concave roller and track from a vintage 1977 mirrored bypass closet door. The door is approximately 8',floor to ceiling. The roller actually slides into the bottom rail of the door frame. The flared sides of the roller engage with a small lip along the bottom edge of the frame that holds it in place along with a single screw that is accessed through the vertical side frame.

It appears that you used to manufacture a track that looks very similar to this one, but I don't see it in your product offering any longer. Any advice on retrofitting the doors with hardware that is presently available?

Tom · Accepted Answer

Hello! Thanks for reaching out to us. Your roller here appears to be a match for our 23-043, but I recommend reviewing our dimensions to verify that everything lines up.

As for the track, we never manufactured these. We actually don't manufacture anything, we're strictly a third party supplier. What I can tell you is that your model is no longer made. We also can't ship anything as long as 8'. My recommendation is to use the 23-270; this will replace the old model, but you will have to butt two of them together to make up the length.

Dimensions for 23-043